Netspyder is a MIL-rugged small form factor L2/L3 Switch. The switch is robust design optimized with MIL Circular Connectors and power to withstand hostile environments. With Small Form Factor, conduction cooled, IP-67 rated design and Cisco Network Essentials (switching) or Network Advantage software license (switching + routing) options, the unit supports managed Layer 2 switching and Layer 3 dynamic routing.
Technical Specification
- Layer 2/3 switching: IEEE 802.1, 802.3 standards, NTP, UDLD, CDP, LLDP, unicast MAC filter, VTPv2, VTPv3, EtherChannel, voice VLAN, PVST+, MSTP, and RSTP
- Multicast: IGMPv1, v2, v3 snooping, IGMP filtering, IGMP querier
- Management: Web UI, MIB, SmartPort, SNMP, syslog, DHCP server, SPAN session (1), Full Flexible Netflow (FnF)
- Security: Port security, 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, dynamic ARP inspection, IP source guard, guest VLAN. MAC authentication bypass, 802.1x multidomain authentication, storm control - unicast, multicast, broadcast, SCP, SSH, SNMPv3, TACACS+, RADIUS server/client, MAC address notification, BPDU guard, MACsec-128
- IP routing protocols: OSPF (v4 and v6), RIP (V1 and V2), ISIS (v4 and v6), EIGRP (v4 and v6) Virtualization Vrf-lite
- Security: MACsec-256
- IP Multicast: PIM sparse mode (PIM-SM), PIM dense mode (PIM-DM) and PIM Sparse dense mode
8 PORT UNIT SPECIFICATIONS
- 8 x 1Gb Copper Ethernet (Supports POE*)
- 2 x 1 Gb SFP (Build Option**)
- 2 x 10Gb SFP+ (Build Option)
- 1 x USB/RS232 Console
- Ethernet Indication LED's
- Dimensions (WxHxD) in mm
- 124 x 87 x 204 (WITHOUT POE & SFP)
- 124 x 87 x 267 (WITH POE WITHOUT SFP)
- 175 x 87 x 204 (WITHOUT POE WITH SFP)
- Weight: < 2.2 kgs
- Voltage: 28 VDC Nominal (18-32 VDC)
- Power: 35-Watt (200-Watt typ with POE configuration dependent)
- Operating Temperature: -40° to +71° Celsius
- Environmental: MIL- STD-810H
- EMI: MIL-STD-461G
- Power: MIL-STD-704F and MIL-STD-1275E
- POE is build option.
- ** Out of 8 x 1Gb Copper Ethernet ports, 2 ports are combo with 1Gb SFP. Either 1Gb Copper or 1Gb SFP can be used at a time.
24 PORT UNIT SPECIFICATIONS
- 24 x 1Gb Copper Ethernet (Supports POE*)
- 8 x 1 Gb SFP (Build Option**)
- 2 x 10Gb SFP+ (Build Option)
- 1 x USB/RS232 Console
- Ethernet Indication LED's
- Dimensions (WxHxD) in mm
- 124 x 142 x 204 (WITHOUT POE & SFP)
- 175 x 142 x 267 (WITH POE & SFP)
- Weight: < 3.3 kgs
- Voltage: 28 VDC Nominal (18-32 VDC)
- Power: 45-Watt typ (540-Watt with POE configuration dependent)
- Operating Temperature: -40° to +71° Celsius
- Environmental: MIL- STD-810H
- EMI: MIL-STD-461G
- Power: MIL-STD-704F and MIL-STD-1275E
- POE is build option.
- ** Out of 24 x 1Gb Copper Ethernet ports, 8 ports are combo with 1Gb SFP. Either 1Gb Copper or 1Gb SFP can be used at a time.